Link Systems designs, develops
and manufactures electronic controls, monitors and safety devices for the
metal stamping and fabrication industry. An engineering company committed
to providing practical solution to your needs for automation, productivity,
quality, safety and shop floor information storage and retrieval, Link
Systems wants to be your metalforming partner.
The OmniLink System 5000
is simply the most advanced integrated multiple microprocessor power press
control available. It is a combination of press control, automation
control, and tooling monitor integrated into one easy to use unit.
|
The following functions can be provided by the OmniLink
System 5000:
-
Clutch/Brake control
-
Programmable Limit Switch for sequencing press auxiliary systems and automation
-
Large, easy to use, high-resolution, Full Color monitor
-
Both graphic and digital display of crank angle
-
Press auxiliary systems control
-
Enhanced diagnostics provides the reason for the last 128 stops, stop date
and time
-
Automation Interfacing and Monitoring
-
Extensive Die Protection/Process Monitoring
-
Signature and Tonnage Monitoring
-
Job Storage and Recall for 500 production jobs
-
User Entered Job Notes for each stored job to prompt setup and operator
-
Servo Feed Interface standard
-
Auto Setup for shut height, counterbalance air pressure, cushion air pressure,
and hydraulic overload settings
-
Preventive Maintenance Software allows the User to Schedule/Monitor Service
-
LinkNet PC networking
-
Plus, additional automation and control features to suit most user requirements
|
Additionally, Link can supply all motor controls for the
press in the same enclosure as the OmniLink System 5000 controller
rack to provide a compact, consolidated control system. |
| The System 2500
provides flexibility and ease of setup for the control, sequencing, timing
and monitoring of feed line, ejection, transer and other auxiliary automation
equipment used with power presses through quick, simple keyboard programming
of up to 24 Programmable Limit Switch outputs and 8 Die Protection and
automation inputs. |
 |
| A non-volatile memory that stores 100 jobs provides for
paperless record keeping and recall of each job setup. Stroke, batch,
part, and quality check counters are standard on the system to give information
and control over part runs. The System 2500 can be easily
interfaced to communicated with most Servo Feeds. |
 |
The System 1100 is a microprocessor-based
monitor that can determine, display and compare developed forces with preset
limits for machines that use large forces in the production process. |
-
Available in either 2 or 4 channels
-
Use of Data Windows allow for close monitoring by not only checking absolute
peak tonnages, but also checking up to 4 additional local peaks created
by staggered tooling
-
Automatic setup allows all setpoints to be calculated and set automatically
-
123 setups can be stored and recalled by job name or number
-
Both forward and reverse loads can be displayed.
|
MultiSet
Counterbalance, Die Cushion, and Shut Height controller
-
Supports a shut height suystem and either a counterbalance or die cushion
system
-
Automatically adjusts pressure and shut height to setpoints entered by
user
-
Can store and recall setpoints on a per job basis
-
Stops the press if the shut height drifts out of tolerance during production
-
Displays current die cushion or counterbalance air pressure in PSI
-
Displays current die weight, cushion force, and shut height in user selected
units. (i.e., Kg, Tons, Lbs, inches, millimeters)
-
Gives current system status and last error messsage.
|
 |
MicroLink
Operator Interface Terminal
-
Job Storage and recall for 250 jobs
-
Part, Batch, quality, and stroke counters
-
Password protected zones with user configurable acccess codes
-
Internal clock and date functionality
-
Feed interface support
-
Full diagnostic messages
-
LinkNet pressroom monitoring software compatible
|
|
